Description
Instructions
No mixing required, do not shake or stir.
Must be applied in temperatures above 67 degrees F ( 20 degrees C) but the warmer the better.
Build up achieved in 2 coats but 3 coats is better.
Use a colour preservative if you need to.
Water based product so the coating will shrink a bit.
Roddancer recommend that the first coat to get the thread soaked , with no build up at all, this will help with any bubbles that might occur With putting on thicker coats, Wick off any extra 2nd coat can be applied much thicker, if bubbles appear, the only way to remove them is to poke them out with a toothpick.
Allow at least 72 hours for full cure.
Reviews
There are no reviews yet.